Operation Manual

SELF-TIMER

The electronic self-timer will delay release of the shutter about 10 sec. after

you press the shutter-release button.

To set:

1. Open the card door and press the self-timer/drive-mode button once. The

self-timer indicator will appear in the body data panel.

2. Compose your scene and attach the eyepiece cap.

3. Press the shutter-release button all the way down to start the timer.

• The AF illuminator will blink twice per second until the shutter releases.

• The self-timer can be stopped during countdown by moving the main

switch to LOCK. To restart the timer from the beginning of its countdown,

move the main switch back to ON and press the shutter-release button again.

To cancel the self-timer, move the main switch back to ON and press the

self-timer/drive-mode button.

• The self-timer automatically switches off after shutter-release. To make

another exposure with the self-timer, repeat steps 1 - 3.