Operation Manual

In P mode, if you move the front control dial, the depth index will be
replaced by the action index. It shows the approximate amount of
action-stopping ability the current shutter speed setting will provide for
the subject which the camera currently detects. If you move the indicator
to the right by turning the front dial to the right, then the camera will set a
faster shutter speed and will adjust the aperture to maintain a correct
exposure; turning the dial to the left will provide slower shutter speeds.
• To return to P mode, press the program re-set button; or, to return to P
mode and keep any changes you have made to the camera's operation,
press the flash pop-up button.
• If you do not touch any controls for 30 sec, the camera will return to P
mode automatically.
• If the aperture display blinks, the aperture required for a correct
exposure is not available. If the lens' maximum aperture blinks, move the
indicator to the right.
• If the metering indicators blink in the viewfinder data panel, the
light level is beyond the coupling range of the camera and lens. In bright
light, attach a neutral density filter; in low light, return to P mode.
• The flash will not fire while you are in Ps.
Ps
-NEXT PAGE-
35