Operation Manual

• To return to P mode, press the program re-set button; to return to P

mode and keep any changes you have made to the camera's operation,

press the flash pop-up button.

• The flash will not fire manually or automatically while you are in PA.

• To turn the depth index off, press and hold the program re-set button

down and move the main switch back to ON. Repeat to turn the index on

again.

• Most lenses will not use all the positions on the index.

• The approximate depth which is indicated may be incorrect if the

background is very close to the subject.

• If you move the front dial, the camera will change to Ps. See next section

for more information.

• For more information on aperture and depth, see p.84.