Operation Manual

To remove:
1. While pressing the lens release, turn the lens counterclockwise until it
stops. Lift the lens out of the mount.
2. Immediately attach the rear cap to the lens and the body cap or another
lens to the camera. This will protect the camera interior, lens contacts, and
lens elements.
- Be carefu!
• Do not to force the lens onto the body if it does not turn smoothly.
• Never touch anything inside the camera, especially the lens contacts
and mirror.
Care of Glass Surfaces
• Never touch any lens surfaces (including the eyepiece) with your
fingers. If a lens becomes dirty, first gently clean it with a lens brush. Then,
if necessary, moisten a sheet of lens tissue with one drop of lens-cleaning
fluid and, starting from the center of the lens, wipe the glass in a circular
motion.
• Never lift the mirror or touch its surface, as this may impair its alignment
or scratch its face. Dust on the mirror's surface will not affect meter
readings or picture quality. If it is distracting, have the camera cleaned at
an authorized Minolta service facility.
11