Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
60 (2186)
REPAIR GUIDE
Error code on adjustment program
Error Code List of PC Adjustment program
Discription about adjustment NG Code
ＮＧ Ｃｏｄｅ：
ＮＧ Ｃｏｄｅ： ＮＧ Ｃｏｄｅ：
ＮＧ Ｃｏｄｅ：
０ｘ００００００００
０ｘ０００００００００ｘ００００００００
０ｘ００００００００
1) Compare to the standard value
00 : Greater than standard value
01 : Smaller than standard value
2) Step number of adjustment sequence
00 ∼ ff : Sequence number
3) ＮＧ item nubmer
Refer to the nexe page
4) Adjustment Item
[ 0* ] Before adjustment process
00 : Initialization, reading version Info., etc.
01 : -----
0f : -----
[ 7* ] Adjustment of image taking
70 : Black level
71 : Sesitivity
73 : Black defective pixels
74 : White defective pixels
75 : Defective pixels for long exposure
77 : White balance
78 : AORI
[ 9* ] Adjustment of SHAKING
90 : CCD center
91 : Frequency
92 : SERVO
93 : GYRO
94 : SHAKE GAIN
[ ** ] Other Adjustment
a1 : FLATNESS
a2 : EZ
b0 : SS
b1,b2 : PI-PR
b4 : PRETRIGGER
b6 : AE
e2 : Vsub voltage
e5 : SHAKE Screening