Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
(2186) 55
REPAIR GUIDE
■■
■■
■
Fig. 2Fig. 2
Fig. 2Fig. 2
Fig. 2
■■
■■
■
Fig. 1Fig. 1
Fig. 1Fig. 1
Fig. 1
Adjustment of white balance (WB)
Required equipment
Light Source-A. Refer to Light source-A maintenance, P. 59.
Light balancing filter LB200
Master body (Mass Production camera of 2186)
AE Master Lens
PC with preinstalled the 2186 adjustment program
USB-2 (USB cable)
AC Adapter AC-11
White chart
Grip Ring
Procedure of the adjustment
1. Set Master body to adjustment mode.
Refer to “Starting up the 2186 adjustment program (in the adjustment mode)” in P. 37.
2. Set the camera and the measuring instrument as shown on the Fig.1.
3. Click “WB” of the adjustment menu.
4. Click “MASTER” of WB adjustment menu.
5. Click “OK” after setting light source-A, according to the displayed information.
The adjustment is automatically started.
6. Click “OK” after setting light source-C, according to the displayed information. (Fig. 2)
The adjustment is automatically started.
7.“OK” is displayed on the adjustment menu, then reading data is complete.
8. Click “ADJUSTMENT END”
9. Exchange Master camera for target camera.
Be careful to exchange camera to avoid any change to the setting.
10. Set camera to adjustment mode.
Refer to “Starting up the 2186 adjustment program (in the adjustment mode)” in P. 37.
11. Click “WB” of the adjustment menu.
12. Click “ADJUSTMENT” of WB Adjustment menu.
13.“Does it adjust?” is displayed in the window, then click “YES”.
14. Click “OK” after setting light source-A, according to the displayed information.
The adjustment is automatically started.
15. Click “OK” after setting light source C, according to the displayed information. (Fig. 2)
The adjustment is automatically started.
16. The adjustment is completed when “OK” is displayed on the adjustment menu.
White ChartLight Source A:White ChartLight Source A:
White ChartLight Source A:White ChartLight Source A:
White ChartLight Source A:
Refer to Ligh Source ARefer to Ligh Source A
Refer to Ligh Source ARefer to Ligh Source A
Refer to Ligh Source A
maintenance, P.59maintenance, P.59
maintenance, P.59maintenance, P.59
maintenance, P.59
White ChartWhite Chart
White ChartWhite Chart
White Chart