Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
48 (2186)
REPAIR GUIDE
7985-1021-017985-1021-01
7985-1021-017985-1021-01
7985-1021-01
■■
■■
■
Fig.2Fig.2
Fig.2Fig.2
Fig.2
■■
■■
■
Fig.1Fig.1
Fig.1Fig.1
Fig.1
■■
■■
■
Fig.1Fig.1
Fig.1Fig.1
Fig.1
■■
■■
■
Fig.2Fig.2
Fig.2Fig.2
Fig.2
1,955mm1,955mm
1,955mm1,955mm
1,955mm
AF Chart-AF Chart-
AF Chart-AF Chart-
AF Chart-
ⅠⅠ
ⅠⅠ
Ⅰ
for 2163 for 2163
for 2163 for 2163
for 2163
AF Chart-AF Chart-
AF Chart-AF Chart-
AF Chart-
ⅡⅡ
ⅡⅡ
Ⅱ
for 2163 for 2163
for 2163 for 2163
for 2163
AF Master LensAF Master Lens
AF Master LensAF Master Lens
AF Master Lens
Lens mount surfaceLens mount surface
Lens mount surfaceLens mount surface
Lens mount surface
CameraCamera
CameraCamera
Camera
Focus mode: MF Focus mode: MF
Focus mode: MF Focus mode: MF
Focus mode: MF
Setting for EZ check and adj.Setting for EZ check and adj.
Setting for EZ check and adj.Setting for EZ check and adj.
Setting for EZ check and adj.
Setting for Body and ChartSetting for Body and Chart
Setting for Body and ChartSetting for Body and Chart
Setting for Body and Chart
FLATNESS Adjustment
*Select the island and wave form after the flatness adjustment enables dust check.
Required equipment
Luminance box ( L-2101/L-2111 or multi camera tester: EF-8301 )
AE Master Lens
PC with preinstalled the 2186 adjustment program
USB-2 (USB cable)
AC Adapter AC-11
Procedure of the adjustment
1. Set camera to adjustment mode.
Refer to “Starting up the 2186 adjustment program (in the adjustment mode)” in P. 37.
2. Set the camera and the measuring instrument as in Fig.1.
3. Set the brightness of the luminance box to EV 8.
4. Click “FLATNESS” of the adjustment menu. “Does it adjust?” appears.
5. Click “YES” and then click “START”. Automatic adjustment starts.
6. “OK” appears when adjustment is completed.(Fig. 2)
EZ Check / Adjustment
Preparation of the EZ Check / adjustment
Set up the camera , chart and lighting as in Fig.1 , Fig.2.