Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
(2186) 47
REPAIR GUIDE
■■
■■
■
Fig. 1Fig. 1
Fig. 1Fig. 1
Fig. 1
■■
■■
■
Fig. 2Fig. 2
Fig. 2Fig. 2
Fig. 2
■■
■■
■
Fig. 3Fig. 3
Fig. 3Fig. 3
Fig. 3
■■
■■
■
Fig.4Fig.4
Fig.4Fig.4
Fig.4
(Pitch)(Pitch)
(Pitch)(Pitch)
(Pitch)
(Yaw)(Yaw)
(Yaw)(Yaw)
(Yaw)
Pitch Yaw Adjustment
Turn a flood lamp toward camera during Pitch Yaw Adjustment.
Adjustment
Pitch Adjustment
1. Set camera to adjustment mode.
Refer to “Starting up the 2186 adjustment program (in the adjustment mode)” in P. 37.
2. Attach AF-Y/P Adjuster to the camera, and set Pitch Adjusting Plate as in Fig. 1.
3. Click “AF” of the adjustment menu. “Does it adjust?” appears.
4. Click “YES”. “Please select menu” appears.
5. Click “PITCH/YAW” and then click “PITCH”. Automatic adjustment starts.
6. Adjust the Pitch Adjusting Screw (Fig. 4) so that the reading (Fig. 2) is within the standard.
If not, follow the adjustment procedure below.
7. If the reading is within the standard, click “STOP”.
Yaw Adjustment
8. Attach AF-Y/P Adjuster to the camera, and set Yaw Adjusting Plate as in Fig. 3.
9. Click “YAW”. Automatic adjustment starts.Adjust the Yaw Adjusting Screw as in Fig.4 so that
reading is within the standard.
10. Adjust the Yaw Adjusting Screw (Fig. 4) so that the reading (Fig. 2) is within the standard.
11. If the reading is within the standard, click “STOP”. Perform PITCH adjustment again.
12. Check that the readings are within the standard by repeating PITCH and YAW adjustment.
Pitch Adjusting PlatePitch Adjusting Plate
Pitch Adjusting PlatePitch Adjusting Plate
Pitch Adjusting Plate
■■
■■
■
Insert the plate until it stops.Insert the plate until it stops.
Insert the plate until it stops.Insert the plate until it stops.
Insert the plate until it stops.
Yaw Adjusting PlateYaw Adjusting Plate
Yaw Adjusting PlateYaw Adjusting Plate
Yaw Adjusting Plate
■■
■■
■
Insert the plate until it stops.Insert the plate until it stops.
Insert the plate until it stops.Insert the plate until it stops.
Insert the plate until it stops.
Item Standard
Pitch 0.77 - 1.30
Yaw 0.73 - 1.37
Pitch Adjusting ScrewPitch Adjusting Screw
Pitch Adjusting ScrewPitch Adjusting Screw
Pitch Adjusting Screw
Yaw Adjusting ScrewYaw Adjusting Screw
Yaw Adjusting ScrewYaw Adjusting Screw
Yaw Adjusting Screw