Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
36 (2186)
REPAIR GUIDE
Preparing the 2186 adjustment program
2186 Adjustment Program CD enables adjustment of both 2186 and 2181
PC for use
The PC loaded on either Windows 98/98SE, 2000 Professional or XP and USB terminal originally
40MB or more of available memory and 15MB or more of available hard-disk space
VGA or more monitor capable of displaying at least 32,000 colors
Details of the 2181 adjustment program CD
Installation of the 2186 adjustment program
1. Insert the 2186 adjustment program CD into the CD-ROM drive of PC.
2. Copy the "2186 ADJ" folder from CD-ROM to the desktop.
Installation of the USB driver
*This is an example on Windows 2000. On other version of Windows, procedure is a little different.
This USB driver can be used with 2720 or the other A-series cameras. 2186 does not work with the
previous drivers for 2720 and earlier models.
1. Copy "USB2.0" folder in the 2186 adjustment program CD to anywhere on PC.
2. Copy the following file from "USB2.0" folder to c:\Windows\system folder.
uusbd.dll
*Select "Display all" from the file option of Windows.
3. Set the camera to adjustment mode and then start up the 2186 adjustment program, "KMdsc.exe."
Starting up the 2186 adjustment program (in the adjustment mode) (see P. 37).
4. The new registration for USB is started on PC, and the dialog is opened for specifying USB driver
software.
5. Click “next” on “Add New Hardware Wizard” window.
6. Check “Search for the best driver for your device.” and click “next”.
7. Check “Specify a location.” and click “next”.
8. Click “Browse”.
9. Select "uusbd.inf" in "USB2.0" folder.
10. Click "OK" to start searching driver and then “Windows detect the driver of the device” is displayed on
the screen. Click “next” to start installation.
11. “Windows has finished installing the software that your new hardware device requires.” is displayed
and installation is complete.
Confirmation after installation (In case of using Windows 2000)
12. Right click on “My Computer” icon and select “Properies”.
13. Select “Hardware” tab and click “Device Manager” button.
14. Check whether “Universal USB Driver (Adjust)” is displayed under the tree of “USB device for
UUSBD”.
Make CF card for Adjustment (Used for starting adjustment mode of camera)
1. Insert the 2186 adjustment program CD into the CD-ROM drive of PC.
2. Copy “ram.bin” in “Adj Firm” folder of CD-ROM to the root of CF card.
2186 adjustment program CD
USB2.0
uusbd.dll
uusbd.inf
uusbd.sys
2186ADJ
KMdsc_cs.exe
2186Adj.dll , 2181Adj.dll
ADJ.Firm
ram .bin
Moni1.psd