Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
(2186) 33
REPAIR GUIDE
Required adjustment, setting and confirmation items after repairing(exchanging parts)
Adjust, set and confirm as the following table when the following parts are removed (exchanged).
Follow the steps from the upper line to adjust.
Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Re pl a ced
Viewfinder Back
○○○○○○○○○○○○○○○○○○
PI-PR
○○
FREQUENCY
○○ ○
SERVO
○○ ○
GYRO
○○ ○○ ○ ○○
VSUB
○○
AORI&CENTER
○○○○○○○○○○○○○○○○○○
SS
○○○○ ○
AREA
○○○○○○○○○○○○○○○○○○
PITCH, YAW
○○○○○○○○○○○○○○○○○○
EZ
○○○○○○○○○○○○○○○○○○
FLATNESS
○○○○○○○○○○○○○○○○○○
P RET RI GGER
○○ ○
AE
○
CCD GAIN
○○
DEFECT PIXEL
○○
WB
○○
SHAKE GAIN
○○ ○○ ○ ○○
DESTINATION
○
CCD INCLICATION
○○
Resolving Power
○○○○○○○○○○○○○○○○○○
Exposure Accuracy
○○○○○ ○ ○ ○ ○○
Built-in Flash
○○○○ ○ ○ ○○○○○
Gra ys ca l e s
○○
Color Reproduction
○○
Current Consumption
○○○○○○○○○○○○
B.C.Voltage
○○
Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Replaced Removed Re pl a ced
Viewfinder Back
○○○○○○○○○○○○ ○○
PI-PR
○○
FREQUENCY
○○ ○○
SERVO
○○ ○○
GYRO
○○○○ ○○
VSUB
AORI&CENTER
○○○○○○○○○○○○ ○○
SS
○○○○○○○○○○○○ ○○
AREA
○○○○○○○○○○○○○○○○○○
PITCH, YAW
○○○○○○○○○○○○○○○○○○
EZ
○○○○○○○○○○○○○○○○○○
FLATNESS
○○○○○○○○○○○○○○○○○○
P RET RI GGER
○
AE
○ ○○○○
CCD GAIN
DEFECT PIXEL
WB
SHAKE GAIN
○○○○ ○○
DESTINATION
CCD INCLICATION
○○
Resolving Power
○○○○○○○○○○○○○○○○○○
Exposure Accuracy
○○○○ ○
Built-in Flash
○○ ○○○ ○○
Gra ys ca l e s
Color Reproduction
Current Consumption
○○○○○○○○○
B.C.Voltage
FRONT COVER ASSY
(0121,0122)
TOP COVER ASSY
(0131,0135)
FLASH PCB ASSY
(0473)
I/O FLEXIBLE ASSY
(0406)
Parts
Adj ust ment /Check
GYRO FLEX ASSY
(0414)
MIRROR BOX ASSY
(0500)
AFCHARGE ASSY
(0521)
PENTA ASSY
(0580)
TOUKO ASSY
(0506)
SLIDER ASSY
(0901)
BACK COVER ASSY
(0110)
AF MODULE ASSY
(0265)
CCD ASSY
(0271)
MAIN BOARD ASSY
(0410)
DCDC PCB ASSY
(0402)
Parts
Adj ust ment /Check
REFLECTOR ASSY
(0166)
SHTTER ASSY
(0210)
APERTURE ASSY
(0254)