Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
6
CHECK LIST
(2186)
Image quality
Check Grayscales and Color Reproduction to verify performance.
Capture images with the given condition and save them to a computer, and then
read the color data with the Color Calculator 2 (2766-0008-75).
Color Calculator 2 Installation
1. Load the Color Calculator 2 CD-ROM to the computer.
2. Click on English folder in the CD-ROM.
3. Double-click on SET UP.exe. The installer program starts automatically.
4. Continue the installation according to the screen until "Finish" appears.
Using Color Calculator 2
1. Click Program in Start menu, and click on "Color Calculator".
2. Click on Read Image button and select the desired image in Select Image
window.
3. Set the modes as below.
4. In Multi Area mode, click and drag the edge of the frame to select the entire
color chart.
5. Click on Calculate button. Data calculation starts, and the result is listed in
the right window.
Multi Area mode: The average readings for each of 24 areas are listed.
Center Single Area: The average reading for the center area is listed.
Macbeth Color Checker
LS
BGRYMC
123456
Check Item
Gra
y
scales
,
Color re
p
roduction
Chart
Macbeth Color Checker
Color S
p
ace sRGB
Color Dis
p
la
y
Mode RGB+L*a*b*
Calculate Mode Multi Area
Cro
pp
in
g
Area Size 20×20 Pixel