Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
3
CHECK LIST
(2186)
3.Image cache memory setting
Edit ‐ Preferences - Memory & Image cache... ‐ Check off “Use cache for histgrams”
Screen Dust
1. Measure Equipment: Photoshop
2. Capture Condition:
3. How to measure:
1). Stick to a luminance box and capture, and open in PC.
2). with 33.3% magnification, select Image > Color compensation > Level compensation in Photoshop,
set the Input level to 32 1 233 to confirm whether any stains can be seen on the screen.
4. Quality Regulations:
When stain is admitted, follows the following judgment standards, when setting Iput level of level
Conpensation (select Image > Color compensation > level compensation in Photoshop to 32 1 233.
When you measure L* stain and its peripheral, L* ratio must be 1.3% or less.
L* ratio = (L* around stain bristletail ‐ L* at stain bristletail position)/ L* around stain bristletail ×
100 ≦ 1.3
5. Do the cleaning on the CCD, when users point out the dust on the CCD.
*It is easy to find the dust on screen by using "Auto Levels" of Adobe Photoshop.
This command is located in the "Adjustment" sub-menu in the "Image" menu.
Light source Luminance Box
Illumination EV10
Lens 2613
Capture Distance Stick a lenz to a luminance box.
Exposure Mode A mode (F11)
WB Preset ( A light source)
Focus
∞
position
Image Size 3008x2000 (L)
Compression Mode Fine or Std.