Service manual
Table Of Contents
- 1.pdf
- 3-4.pdf
- 5.pdf
- REPAIR GUIDE
- Precautions
- 1. Disassembly of the exterior parts
- ■Wires arrangement
- 2. Disassembly of the I/O FPC ASSY, MAIN PCB ASSY
- 3. Disassembly of the SUB PLATE L, BATTERY CHAMBER
- 4. Disassembly of the CCD ASSY, SHUTTER ASSY
- ■CCD inclination adjustment / repair
- 5. Disassembly-1 of the MIRROR BOX ASSY
- 6. Disassembly-2 of the MIRROR BOX ASSY
- 7. Disassembly-3 of the MIRROR BOX ASSY
- 8. Disassembly of the BATTERY CHAMBER, LCD 101
- 9. Disassembly of the TOP COVER ASSY
- 10. Disassembly of the FRONT COVER ASSY, BACK COVER ASSY
- ■Required adjustment, setting and confirmation items after repairing(exchanging parts)
- ■Related adjustment and required setting items
- ■Viewfinder Back Adjustment
- ■Preparing the 2186 adjustment program
- ■Starting up the 2186 adjustment program (in the adjustment mode)
- ■Adjustment of the PI-PR
- ■Adjustment of the frequency for camera shaking (FREQUENCY)
- ■Adjustment of the servo for camera shaking (SERVO)
- ■Adjustment of the gyro for camera shaking (GYRO)
- ■Adjustment of CCD Vsub voltage (VSUB)
- ■Setting for the adjustment of CCD AORI & CENTER
- ■Adjustment / Checking of CCD AORI & CENTER
- ■Manual Set SS & X-Sync. Time-lag Check
- ■Adjustment Manual Set SS
- ■Preparation before AF adjustment
- ■AF Area Adjustment
- ■Pitch Yaw Adjustment
- ■FLATNESS Adjustment
- ■EZ Check / Adjustment
- ■EZ Adjustment
- ■EZ Check
- ■EZ SHIFT
- ■Aperture Preset Check / Adjustment
- ■Check / Adjustment of the AE (AE)
- ■Sensitivity adjustment (CCD GAIN)
- ■Adjustment of the defective pixel (DEFECT PIXEL)
- ■Adjustment of white balance (WB)
- ■Adjustment of the camera shaking compensation (SHAKE GAIN)
- ■FLASH LEVEL SHIFT
- ■Setting of Destination (DESTINATION)
- ■CAMERA LOG
- ■LCD All Segment On
- ■Light Source-A Maintenance
- ■Error code on adjustment program
- ■Measuring instrument
- ■Subsidiary Materials
- REPAIR GUIDE
- 6.pdf
- TROUBLESHOOTING CHART
- 7.pdf
- 8.pdf
- 9.pdf
2
CHECK LIST
(2186)
Macintosh Windows
17 inch type monitor 1024x768 pixels 1024x768 pixels
20 inch type monitor 1152x870 pixels 1152x864 pixels
16.7 million colors True Color (24-bit) or True Color (32-bit)
Screen Area
Colors
Condition of Measure and Appreciation
Basically maesure and appreciation at the blow condition. But it is allowed to use another condition as long as
not to influence the examination results.
(The concrete settings refer to the opelationmanuals of the PC or monitor.)
1. Settings of Screen Area and Colors (System settings of PC)
Mac: Control panel ‐ Monitor & sounds ‐ Monitor ‐ Contrast of colors and Resolution.
Win: Conrtol panel ‐ display ‐ property of display ‐ detail of display ‐ Color palette and Field of
desktop.
2. Settings of monitor size
Adjust size and position of monitor adjustment menu as the center glay scale width of monitor calibra-
tion image.
(Moni1.PSD: file from the 2186 Adjustment Program CD) is about 80mm at 100% display.
After above adjustment, the length of a diagonal line of the monitor’s display erea is below.
3. Gamma Settings ( Mac system set up)
Control panel- Color settings of Monitor ‐ Set Color Sync. Profiles of the monitor you use.
4. Settings of monitor color temparature, brightness, contrast
Color temparature of the monitor: 6500K
At monitor calibration image (Moni1.PSD: file from the 2186 Adjustment Program CD), adjust bright-
ness and contrast as the difference between 0 and 5, 255 and 250 of RGB are recognized slightly and the
difference between 0 and 10, 255 and 245 of RGB are recognized distinctly.
5. Surroundings
Perpendicular illuminance to the monitor surface is less than 200lux.
There is no reflects such as flourescent on the monitor surface.
Settings of Photoshop
1. Photoshop ver for measurement and appriciation
Photoshop ver for measurement and appriciation are from ver.4 to ver.7.
When use newer versions than Photoshop 5, set up color setting as 2.
(For Photoshop4, no need to set up especially.)
2. Color setting of newer versions than Photoshop 5
For Photoshop5, Default Color Setting is “sRGB”. This setting convert RGB data when open images.
So you must set up below setting. (This is unrelated for Phtoshop4.)
17 inch type monitor: About 393mm
20 inch type monitor: About 462mm
RGB Custom
Gamma 2.2
White point Custom (Custom value x=0.312, y=0.329)
Primaries Trinitoron
Monitor Display Using Monitor Compensation OFF
Windows:
RGB Custom
Gamma 1.8
White point Custom (Custom value x=0.312, y=0.329)
Primaries Trinitoron
Monitor Display Using Monitor Compensation OFF
Macintosh: