Quick Start Guide

Shooting
In playback mode, press the Menu
button and select “Format” on Tab 1 of
the menu.
In recording mode, press the Menu
button and enter your selections for
“Image size” and “Quality” on Tab 1 of
the menu.
Formatting the memory card
Setting image size and quality
Printing
In either playback or recording mode, press the Menu button and select “Transfer mode” > “PTP” on Tab 1 of the
menu. Next, use the included USB cable to connect the camera to a PictBridge-compatible printer; a
PictBridge frame selection screen will automatically be displayed when the camera and printer are connected and
switched on. Print options such as number of copies, paper size, print quality, batch printing, index printing, and
DPOF printing can be entered on Tabs 1, 2, and 3 of the PictBridge menu.
Resetting
In recording mode, press the Menu
button and select “ Reset” on Tab 2
of the menu.
In either playback or recording mode,
press the Menu button and select
“Reset default” on Tab 3 of the menu.
Reset recording modes Reset all modes and menus
Reviewing
Press the Playback button to review images. You can scroll to the
next frame by pressing the controller’s left/right arrow keys or by
rotating the Control dial. Press the +/- button to enlarge an image;
the area to be enlarged can be specified by pressing the arrow
keys. A combined shooting information, histogram, and thumbnail
view can be displayed by pressing the Display button.
Single images can be deleted by pressing the Delete button. To
delete multiple images, press the Menu button and select “Delete”
> “Marked Frames” on Tab 1 of the menu. A frame selection
screen will appear from which you can select the frames you
want to delete.
Image size
Quality
Inst. playback
Noise reduction
To select L / M / S image size
To select file format (RAW, JPEG) and image quality
To select the duration of instant playback (10 / 5 / 2 / 0 s)
To set noise reduction on/off
To select Fill flash / Red-eye reduction / Rear Sync / Wireless • Remote flash modes
To select ADI or pre-flash TTL flash control
To set bracketing frame order
To restore recording-mode factory default settings
To play back images automatically
To select images for DPOF printing
To print the date of capture on each image
To create an index print with the DPOF order
To cancel DPOF print orders on the memory card
Delete
Format
View folder
Folder name
Key lock
Slide show
DPOF set
DATE imprint
Index print
Cancel print
To delete images from memory card
To format memory card
To select one or all folders to view in playback
To specify the folder name for single-folder playback
To protect images from deletion
Index format To specify no. of frames (4 / 9 / 16 ) or tab browser index display
Recording Menu
Playback Menu
Custom Menu Setup Menu
Card Shutter lock
Lens Shutter lock
AF area setup
Monitor display
Rec. display
To set card shutter lock on/off
To set shutter lock on/off when no lens is mounted
To select the duration of focus area illumination (0.3 / 0.6 / 0 s)
To select manual shutoff or automatic shutoff when viewfinder is used
To select auto-rotate or horizontal (in vertical position)
Play. display To select auto-rotate or manual-rotate
Priority setup
Focus Hold button
AEL button
Control dial setup
Exp. comp. set
To select AF or shutter-release priority
To select focus-hold or depth-of-field preview
To select AE hold / AE toggle / Spot AE hold / Spot AE toggle
To select shutter speed or aperture control
To select ambient & flash, or ambient only
AF Illuminator To set AF illuminator on/off
File # memory
Folder name
Select folder
New folder
To activate the file number memory
To set Standard or Date as the folder name format
To select the destination folder for recorded images
To create a new folder
LCD backlight
Power save
Men. Sec. Memory
Delete confirmation
Clean CCD
To set the duration of backlight illumination (5 / 100 / 30 / 60 s)
To set the auto-power-save delay (1 / 3 / 5 / 10 / 30 min.)
To save the last menu section opened
To change the delete confirmation screen default setting
To perform CCD surface cleaning
Reset default
To reset all camera modes and menus to factory-default settings
LCD brightness
Transfer mode
Video output
Audio signals
Language
To set monitor brightness in 11 steps
To select data storage or PTP (print to PictBridge-compatible
printer) data transfer mode
To switch between NTSC and PAL
To change or turn off the audio tone when shutter button is pressed
To select one of the 11 menu languages
Date / Time set
To set the camera’s clock and calendar
Function Button*
AF area / AF modes / Metering modes / Flash compensation / Digital Effects Control (DEC)
* See page 5 for the detail.
Flash mode
Flash control
Bracket order
Reset