Instruction Manual

17
16
Names of parts
VIEWFINDER
RECORDING MODE DISPLAY
8. White-balance panel
2. Flash panel
5. AE lock / battery condition panel
7. Image size / quality panel
9. Frame counter
4. Color mode / Digital Effects Control / Metering / AF
area / AF mode / Release priority / Drive mode panel
3. Ev scale
1. Exposure mode / exposure panel
6. Camera-sensitivity / Zone Matching panel
Wide focus frame
Spot-metering area (p. 59)
Spot AF area (p. 47)
Local focus areas (p. 57)
1. Flash-compensation indicator (p. 60)
4. Wireless/Remote flash indicator (p. 76)
5. AE lock indicator (p. 46)
9. Ev scale
8. Aperture display
7. Shutter-speed display
10. Frames-remaining counter
11. Camera-shake warning (p. 30)
3. High-speed sync. indicator (p. 112)
2. Flash signal (p. 31)
12. Anti-Shake scale (p. 32)6. Focus signal (p. 29)
The spot AF area and local focus areas are illuminated briefly to indicate the point of focus when
the focus is locked.
The recording display shows information on
camera operation in panels. The information
displayed varies with the functions set.
As the camera is rotated to a vertical
position, the display automatically rotates to
compensate for the camera position.
The monitor-display setup and recording-display setup custom functions in section 2 of the
custom menu control the monitor display (p. 97).
Camera Notes
The frames-remaining counter indicate the approximate number of frames that can be stored in the
camera buffer memory while recording. This number changes as images are captured and saved to
the memory card.