Instruction manual

DSP set

Noise reductn

Monitor amp.

Memory Save

Digital zoom

Off

Manual exp. Exp. priority

:enter

Select register

:select

Recording menu

Memory - storing camera settings

To save the current camera settings, select “Save” in the

memory option in section 3 of the recording menu. The

settings are displayed.

Camera settings cannot be deleted from memory by turning the camera off. They are erased with the

reset function in section 3 of the setup menu.

On the register-selection screen, use the left/right keys of

the controller (1) to select the memory register in which

to store the settings; any previous settings are replaced.

Press the central button of the controller (2) to complete

the operation. The menu button cancels the operation

without saving the settings.

Five sets of camera settings can be saved in section 3 of the recording menu. This saves time under

frequently repeating conditions by eliminating the need to set the camera. Except for functions like

subject programs, date imprinting and instant playback, most recording-mode camera settings will be

saved including the position of the Flex Focus Point, the selected spot AF area, the display format and

changes made with the function button or drive-mode button. Setting are displayed before being

saved.