Instruction manual

95
Date imprinting
The date and time of recording can be printed directly on a still
image. The imprinting function must be activated before the image
is taken. Once activated, the date will continue to be imprinted
until the function is reset; a yellow bar is displayed behind the
frame counter on the monitors to indicate the function is active.
Date imprinting cannot be used with RAW and RAW & JPEG
image quality.
The date and time is imprinted in the lower
right corner of the image when viewed
horizontally. It is printed directly on the
photograph writing over the image
information. The date can be imprinted in
three formats: year / month / day, month / day
/ year, and day / month / year. The date format
is set in the date/time setting screen in
section 1 of the setup menu (p. 131).
Date imprinting is selected in section 2 of the
recording menu (p. 84). Date imprinting has
two menu options. The YYYY/MM/DD option
prints the date. The MM/DD/hr:min option
prints the month, day, and time of recording.
Imprinting
indicator