Instruction manual

Recording menu

Spot AE area

When using spot metering (p. 72)

with the Flex Focus Point (p. 48), the

position of the spot metering area

can be specified at the center of the

live image or linked to the Flex

Focus Point; the spot moves after

the position of the FFP is moved.

This is set in section 1 of the

recording menu (p. 84).

Center spot With Flex Focus Point

Flash control

Automatic - automatically calculates flash exposure using a pre-flash.

Manual flash control - fires the flash at full power, 1/2, 1/4, 1/8, or 1/16 power. Manual flash control

cannot be used with red-eye reduction or with external flash units. Because no pre-flash is used, it

can be used to fire slave flash units.

Automatic and manual flash control are available. Flash control is changed in section 1 of the

recording menu (p. 84).

Select the manual-flash option on the menu. Close the

menu.

Press the up key of the controller (1) to display the

exposure-compensation screen. Use the up/down keys (2)

to select the manual flash, and left/right keys (3) to select the

power ratio. Press the shutter-release button partway down

or press the center of the controller to complete the

operation.

Manual flash

:enter:adjl.:move