Instruction manual

When a large amount of image data is captured in a short
period, the camera’s internal buffer memory becomes full; the
frame counter turns yellow on the monitors. Time must be
given for this data to be written to the memory card. Wait for
the indicator to turn white before capturing more images.
Camera Notes
Compose the picture as described in the basic recording
section (p. 30). Press and hold the shutter-release button all
the way down (1) to begin taking pictures. The camera
continues to record images until the maximum number has
been taken or the shutter button is released.
The built-in flash can be used with standard and high-speed
continuous advance, but the rate of capture is reduced
because the flash must recharge between frames.
83
1