Instruction manual

Continuous
82
Advanced recording
Continuous-advance mode allows a series of images to be captured while holding down the shutter-
release button. Continuous advance acts like a motor drive on a film camera. RAW & JPEG image
quality cannot be used. RAW cannot be used with UHS continuous advance.
Continuous Advance
Continuous advance - captures a maximum of five images at 2fps. When used with
continuous autofocus, the camera adjusts the focus during the series. The live image is
briefly displayed between frames.
High-speed continuous advance - captures a maximum of five full-size images at 2.3fps.
Focus is locked with the first frame regardless of the focusing mode. The monitor turns off
during the series.
UHS continuous advance - captures forty 640 X 480 size images at 10fps regardless of the
image-quality setting. Focus is locked with the first frame regardless of the focusing mode.
The digital zoom and flash cannot be used. Shutter speeds must be 1/30 second or faster.
Very bright light sources within the image may cause streaking. Black areas caused by a loss
of data may be apparent. When the red low-battery warning is displayed, this drive mode
cannot be used.
Continuous-advance mode is set using the drive-mode button and
the controller (p. 76).
When a continuous-advance drive mode is set, an indicator appears on the
monitors.
:enter:sel.:move