Instruction manual

0.5 Ev
bracket
81
To make a flash bracket, raise the camera flash; the ambient exposure is not bracketed. When using
flash, single-frame advance is employed and the shutter-release button must be pressed for each
exposure.
When exposure brackets are made in S exposure mode, the aperture controls the bracket. In A and
M modes, the shutter speed controls the bracket; in M mode, pressing the AE lock button during the
bracket changes the exposure control to the aperture.
Compose the picture as described in the basic recording section (p.
30).
To make an exposure bracket, press and hold the shutter-release
button all the way down (1); three consecutive images are captured.
0.3 Ev
bracket
Normal
Under
Over
Normal
Under
Over
Frame counter
Bracketing mode
To make a white-balance bracket, press and release the shutter
button. Three consecutive images are made from a single exposure.
1
The bracketing drive mode indicator is displayed when set. The remaining number of frames in the
series is displayed next to the indicator during the bracket.