Instruction manual

To take a single image each time the shutter-release button is pressed

(p. 30).

Use the up/down keys of the

controller to highlight the the

new drive mode (2). Use the

left/right keys to select the drive

mode options (3). Press the

center of the controller or press

shutter-release button partway

down to complete the

operation. Pressing the menu

button cancels the operation.

Also see the camera notes on

page 69.

Single

Advanced recording

The drive mode is set with the drive-

mode button. The drive modes control

the rate and method images are

captured. Indicators showing the

selected drive mode appear on the

monitors.

Using the drive-mode button

To take a series of three images when the shutter-release button is

pressed and held (p. 82).

To delay the release of the shutter by 2 or 10 seconds. Used for self-

portraits (p. 77).

To operate the camera with the remote control unit (p. 78).

To take a series of three images with differing exposure, or white balance

(p. 80).

Continuous

advance

Self-timer

Remote control

Bracketing

Single-frame

advance

Press the drive-mode button (1); the drive-

mode setting screen appears.

:move :enter