Instruction manual

73
Filter
The overall color of a scene can be adjusted. The Filter effects
differ between the color mode in use, see the color examples on
page 171. The Filter effects are set with the function button and the
controller (p. 64). When changing the setting, an icon and numeral
will indicate the filter in effect.
If the Filter is set to any other setting than zero, an indicator and
value will remain on the displays as a warning.
Filter - 3
When used with Natural Color, Vivid Color, Portrait, or Embedded Adobe RGB, the Filter can be
adjusted in eleven levels (±5). A positive adjustment acts like a warming filter. A negative adjustment
makes the image cooler.
When used with the black-and-white color mode, the Filter can tone the neutral monochrome image
in eleven steps. The Filter effect cycles from neutral to red, to green, to magenta, to blue, and returning
to neutral. The zero position is neutral. Black and white filter settings have no effect on RAW images.
:enter:sel.:move