Instruction manual

Auto
To set the white balance to a specific light source. Fluorescent 1 is for
standard fluorescent lighting, and fluorescent 2 is for daylight fluorescent
lighting. For information on light sources, see page 105.
Auto
White
Balance
61
To apply or calibrate custom white-balance. Up to two custom white
balance settings can be registered and recalled. See the next page for
further instructions.
Custom
white
balance
Tungsten
Shade
Fluorescent 1, 2 Flash
Daylight
Cloudy
Custom recall 1, 2Custom set
To automatically detect the type of light and adjust the white balance
accordingly. When the built-in flash is used, the white balance is set for the
color temperature of the flash.
Auto
Preset
white
balance