Instruction manual

47
Spot AF Areas
One of the eleven spot AF areas can be selected. Spot AF areas cannot be
used with the digital zoom or movie recording.
When the spot AF area mode is selected, eleven spot AF
areas are displayed. The active AF area is blue. Use the
controller’s four-way keys (1) to select a new area.
Pressing the center button of the controller while
pressing the shift button resets the AF area to the
center.
Press the central button of the controller to select the
area; the other ten areas disappear. Only when a focus
area has been selected, can the controller be used for
other camera operations.
Pressing the shutter-release button partway down also
completes the operation; the spot AF area turns red
briefly to confirm focus.
Once a focus area is selected, it remains active even after
the picture has been taken. Press the center of the
controller to select another area.
Press the central button of the controller and select the spot AF
area mode using the control dial as described on the previous
page.