Instruction manual

The Anti-shake system minimizes the affect of
camera shake. Anti-shake is employed when the
shutter speed falls below a certain limit
depending on the focal length in use. The
effectiveness of Anti-shake depends on the
shutter speed in use and the degree of shaking.
The system may not work with moving subjects
or when the camera is panned.
When the system is active, the Anti-shake
indicator appears. Anti-shake can be turned off
and on by pressing the Anti-shake button (1).
36
Basic recording
Anti-shake is not effective with a tripod mounted camera; turn off the Anti-shake function to conserve
power.
If the camera is overheating because of operating and ambient temperatures, the Anti-shake system
indicator turns red and the system will turn off automatically. Allow the camera to cool before using
Anti-shake.
Frame the subject as described in the basic
operation section and press the shutter-release
button partway down. Confirm the image has
stabilized on the monitor and press the shutter-
release button all the way down to take the
picture.
Anti-shake indicator
1
Anti-shake system