Instruction manual

If the shutter speed falls below the point where the
camera can be safely hand held, the camera-
shake warning appears on the monitors
regardless if Anti-shake is active.
Camera shake is slight blurring caused by subtle
hand motion and is more pronounced at the
telephoto position of the lens than at the wide-
angle. Although the warning appears, the shutter
can still be released.
If the warning appears when the shutter-release
button is pressed partway down, place the
camera on a tripod, use the flash, Anti-shake,
increase the camera sensitivity (ISO) (p. 66), or
zoom the lens towards the wide-angle position
until the warning disappears.
35
Camera-shake warning
Camera-shake indicator