Instruction manual

31
Press the shutter-release button partway down (2) to lock the
focus and exposure.
When the focus is set, an AF sensor is displayed in the live
image to indicate the point of focus. The focus signals (p. 33)
on the monitors will confirm that the image is in focus. If the
focus signal is red, the camera was unable to focus on the
subject. Repeat the previous steps until the signal is white. The
shutter speed and aperture value will change from white to
black indicating the exposure is locked.
Press the shutter-release button all the way down (3) to take the
picture. The access lamp blinks indicating the image data is
being written to the memory card. Never remove a card while
data is being transferred.
Shutter-speed and aperture
Focus signal
AF sensor
2
3