Instruction manual

23
To eject a card, open the card-slot door (1), and press and release the card-eject lever to extend it (2).
Press the card-eject lever to eject the card (3). The card can now be pulled out. Take care when
removing the card as it becomes hot with use. The card-eject lever should remain inside the camera
body. If it extends, push it into the camera.
Insert a new memory card and close the card-slot door (4).
If the “Unable to use card. Format?” message appears, the card should be formatted with the camera.
Using the left/right keys of the controller, select “Yes” to format the card. “No” closes the window
without formatting the card; remove the unformatted card from the camera. Formatting erases all data
on the memory card permanently. Depending on the memory card, formatting can take several
minutes. A memory card can also be formatted in section 1 of the playback menu (p. 116). A memory
card used in another camera may have to be formatted before being used.
If the card-error message appears, press the central button of the controller to close the window;
check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
2 3 4
1