Instruction manual

Installing and changing the battery

Open the battery-chamber door by sliding the battery-chamber

lock to the open position.

Insert the battery with the battery contacts first. Insert the battery

so that it slides past the battery latch in the chamber. Push the

battery into the chamber until the latch clicks into place.

This digital camera uses one NP-800 lithium-ion battery. Before using the battery, read the safety

warnings on pages 4 of this manual. When replacing batteries, the camera should be off.

To r emove a battery, slide the battery latch to the side of the

battery chamber; the battery will spring out.

Close the battery-chamber door and slide the battery-chamber

lock to the close position.