Instruction manual

165
Cleaning
• If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth. If the camera or
lens comes in contact with sand, gently blow away loose particles. Wiping may scratch the surface.
•To clean the lens surface, first blow away any dust or sand, then gently wipe the lens with a cloth or tissue
designed for optics. Use lens-cleaning fluid if necessary.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
Storage
• Store in a cool, dry, well-ventilated area away from dust and chemicals. For long periods of disuse, store
the camera in an airtight container with a silica-gel drying agent.
• Remove the batteries and memory card from the camera when not in use for extended periods.
• Do not store the camera in an area with naphthalene or mothballs.
• During long periods of storage, operate the camera occasionally. When taking the camera out of storage,
check that the camera is functioning properly before using.
Operating temperatures and conditions
• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to
extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to prevent
condensation from forming. Allow the camera to come to room temperature before removing it from the
bag.