Instruction manual

Troubleshooting
160
Problem
Symptom Cause Solution
The camera will
not work.
Nothing displayed
on the monitors.
The battery is dead.
The AC adapter is not
connected properly.
Recharge battery (p. 18).
Check that the adapter is connected to
the camera and a live electrical outlet
(p. 21).
The section covers minor problems with basic camera operation. For major problems or damage to
the camera or charger, or if a problem continues to reoccur frequently, contact a Konica Minolta
service facility.
The camera
automatically
shuts down
without auto
power save.
The camera is hot or it has been
left in a very hot environment.
Turn off the camera and allow it to
cool.
Shutter will not
release.
“0000” is
displayed on the
frame counter.
Memory card is full and unable
to store an image at the image-
quality or image-size setting on
the camera.
Insert a new memory card (p. 22),
delete some images (p. 39), or change
the image-quality or image-size setting
(p. 86).
TROUBLESHOOTING
No-card warning
appears on the
monitors.
No memory card in the camera. Insert a memory card (p. 22).