Instruction manual

156
Data-transfer mode
Navigating the PictBridge menu
Press the central button of the controller to select the
highlighted setting.
Use the left/right keys of the controller to highlight the
appropriate menu tab; the menu changes as the tabs are
highlighted.
Use the up/down keys to scroll through the menu options.
Highlight the option whose setting needs to be changed.
With the menu option highlighted, press the right controller key;
the settings are displayed with the current setting highlighted.
If “Start” is displayed, press the center of the controller to
continue.
Use the up/down keys to highlight the new setting.
Once a setting has been selected, the cursor will return to the menu options and the new setting will
be displayed. To return to the PictBridge screen, press the menu button. Read the following sections
on information on the menu options.
Pressing the menu button (1) turns the menu on and off. The four-way keys of the controller (2) move
the cursor in the menu. Pressing the central button of the controller enters a setting. The options that
can be changed vary with the printer.
Activate the menu with the menu button.
2
1