Instruction manual

155
The number of prints in the print run are displayed as well as the
print parameters selected with the menu. See the menu navigation
section for more information (p. 156). Press the central button of the
controller to begin printing, or press the menu button to return to the
PictBridge screen.
Once printing begins, the operation can be canceled by pressing
the center of the controller. The printing-finished message
indicates the end of the operation; turn the camera off to end the
routine.
If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged
battery or the optional AC adapter.
If a minor problem occurs during printing, such as the paper runs out, follow the procedure
recommended for the printer; no action is required for the camera. If a major printer error occurs,
press the center of the controller to end the routine. Refer to the printer manual for the correct
procedure for the printer problem. Check the printer settings before starting again and deselect the
images that were printed.
Notes on printing errors
Printing finished.
OK
No. of prints: 7
Print size: Printer setup
Layout: Printer setup
Print quality: Printer setup
Data print: Printer setup
:start