Instruction manual

136
Folder name
All recorded images are stored in folders on the memory card. Two folder-name
formats are available in section 2 of the setup menu, standard and date.
Standard folders have an eight character name. The initial folder is named
100KM020. The first three digits are the folder’s serial number, which will increase
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 020 indicates a
DiMAGE A200.
A date folder name also starts with the three digit serial number and is followed by
one register for the year, two register for the month, and two registers for the day:
100YMMDD. The folder 10141223 was created in 2004 on December 23rd.
With the date folder format selected, when an image is recorded a new folder with
the day’s date will be created. All images recorded that day will be placed in that
folder. Images recorded on a different day will placed in a new folder with the
corresponding date. For more information on folder organization and file names,
see page 148.
100KM020
10141223
(Standard)
(Date)
Setup menu
File Number (#) Memory
When file number memory is selected, if a new folder is created, the first file stored in the folder will
have a number one greater than the last file saved. If the file number memory is disabled, the image
file name will have a number one greater than the last image saved in the folder.
If file number memory is active and the memory card is changed, the first file saved to the new card
will have a number one greater than the last file saved on the previous card if the current folder in the
new card does not contain an image with a greater file number. If it does, the file number of the new
image will be one greater than the greatest in the folder. File number memory is activated in section
2 of the setup menu.