Instruction manual

133
Transfer mode
The data-transfer mode must be specified depending on whether the camera is used to transfer data
to a computer or print images with a PictBridge compatible printer. The transfer mode option can be
selected in section 1 of the setup menu. Select the appropriate option:
Data storage - to transfer data between the camera and a computer. This option must be selected
when moving image files to a computer or when using the DiMAGE Viewer software.
PTP - to print images with a PictBridge compatible printer.
Anti-shake
When the Anti-shake system activates can be changed in section 4
of the setup menu. Two options are available:
Display + Exp. - when the shutter-release button is pressed partway
down, the anti-shake function will activate if on. The affect of the
Anti-shake system can be seen in the live image.
Exposure - Anti-shake is only applied during the exposure and is not apparent in the live image. When
the shutter-release button is pressed partway down, wait a moment before taking the picture for the
Anti-shake system to stabilize the image.
Each time a delete command is used a confirmation screen
appears confirming the action to erase the image data. When this
screen opens, the no button is highlighted. This function allows
the yes button to be initially highlighted to make deleting images
easier. Care should be taken when deleting images as the data
cannot be retrieved once erased. Delete confirmation screen
option can be selected in section 4 of the setup menu.
Delete confirmation
Delete this frame?
Yes
No
Anti-shake Display + Exp
Delete conf. “No”