Instruction manual

124
Advanced playback
Up to XXMB of data can be copied. If too many images have been selected, a warning will appear
and the copy routine is canceled. Divide the number of images into two or three batches. The amount
of data that can be converted into E-mail copies depends on the free space remaining on the memory
card.
The copy and E-mail copy functions have two menu options:
This frame - To copy the image currently displayed or highlighted
in playback mode.
Marked frames - To copy single or multiple images in the selected
folder or on the memory card. When selected, the frame-selection
screen (p. 114) will appear; highlight the images to be copied with
the yellow border and then press the up key of the controller to
mark it with the check indicator. To deselect an image, highlight the
selected thumbnail and press the down key; the check indicator
will disappear. Continue until all the images are marked. Press the
central button of the controller to continue, or press the menu button to cancel the operation and
return to the playback menu.
Copy
When images(s) to be copied are selected, a screen with four
messages is displayed; the messages are highlighted as the
copying procedure is executed.
Copy –
E-mail Copy –
Mag.Setup X2.0
Change card.
Copying to card.
Copying completed.
Copy
Copying to camera memory.