Instruction manual

106
Movie
MODE
Press the shutter-release button all the way down and release to
start recording. The camera will continue to record until the
recording time is used or the shutter-release button is pressed
again.
This camera can record digital video with sound. Set the mode
switch to the movie-recording position (1). Before recording, the
monitor frame counter shows the maximum time in seconds that
can be recorded. The length of the movie clip depends on the
image size and frame rate, and the space available on the memory
card. The maximum recording time is 15 minutes; low light levels
can shorten this time. Image size and frame rate is selected with
the movie menu (p. 108). Movie recording is not possible when the
red low-battery warning is displayed.
Movie recording
Recording indicator
Remaining time
Place the subject in the center of the live image and press the
shutter-release button partway down to set the focus. Use the
focus signal to confirm focus.
Total recording time for the next movie clip
Focus signal
Frame rate
Image size
When making movie recordings, be careful not to touch or
cover the microphone. The quality of the recording is
proportional to the subject to microphone distance. For
best results, hold the camera approximately 20cm (8in)
from your mouth.
MOVIE MODE
Camera Notes
1