Instruction manual

100
Recording menu
DSP (digital subject program) setup
The memory registers used for camera settings can be assigned to
the Digital Subject Program positions on the exposure-mode dial.
This is set in section 3 of the recording menu (p. 84). Two options are
available:
DSP - the Digital Subject Programs are active on the exposure-
mode dial.
Memory recall - the memory register are assigned to the Digital
Subject Program positions as indicated in the illustration.
For more about Digital Subject Programs, see page 58. To save
camera settings turn to page 98.
This function reduces the affect of dark noise caused by long
exposures. Noise reduction is applied to exposures of 1/2 second or
longer. Processing is applied to each image after it is captured. The
monitor remains blank during processing for a maximum of 30
seconds. Noise reduction uses dark-frame subtraction. Noise
reduction can be applied when operating temperatures are high
regardless of the shutter speed. Noise reduction can be turned off in
section 3 of the recording menu.
Noise reduction
Memory
DSP set
Noise reductn
On
Monitor amp.
Off
Manual exp.
Digital zoom
Memory –
DSP set DSP
Noise reductn On
Monitor amp. Auto
Digital zoom
Interpolate
Manual exp. Exp. priority