Instruction manual

96 SETUP MENU
Frame the subject as described in the basic operation section and press the shutter-
release button partway down. Confirm the image has stabilized on the monitor and press
the shutter-release button all the way down to take the picture.
Three options are available for the Anti-shake system in
section 4 of the setup menu (p. 86):
Display + Exp. - when the shutter-release button is
pressed partway down, the anti-shake function will activate.
The affect of the Anti-shake system can be seen in the live
image.
Exposure - Anti-shake is only applied during the exposure
and is not apparent in the live image. When the shutter-
release button is pressed partway down, wait a moment before taking the picture for the
Anti-shake system to stabilize the image.
Off - Anti-shake will not activate.
The Anti-shake system is less effective at short subject distances or when using the
macro function (p. 35). The use of a tripod is recommended. Anti-shake is not effective
with a tripod mounted camera; turn off the Anti-shake function to conserve power.
A thermometer indicator replaces the Anti-shake indicator when the camera is
overheating because of high operating or ambient temperatures. When taking
still images, the Anti-shake system is used only for the exposure. When taking
movies, Anti-shake is canceled. Allow the camera to cool before using Anti-
shake.
Video output
Transfer mode
NTSC
Data storage
10 sec.
Disp. + Exp.Anti-shake
Self-timer