Instruction manual

Before starting the E-mail copy routine, select the image size of the copy in the custom
2 section of the playback menu (p. 62). Two sizes are available: 640 X 480 (VGA) or 160
X 120 (QVGA).
When the image(s) to be converted to an e-mail file are selected, the
copy routine will begin and a screen will appear indicating the name of
the folder containing the copied images; press the central button of the
controller to return to the menu. The same folder is used to store e-mail
copies until the number of images exceed 9,999.
7372 PLAYBACK - ADVANCED OPERATION
E-MAIL COPY
Copied to 101MLTEM
To copy the file displayed or highlighted in playback mode.
This
frame
Marked
frames
To copy single or multiple files. When selected, the frame-selection screen
will appear; highlight the file to be copied with the yellow border and then
press the up key of the controller to mark it with the check icon. To deselect
a file to be copied, highlight the selected thumbnail and press the down key;
the check icon will disappear. Continue until all the files to be copied are
marked. Press the central button of the controller to continue, or press the
menu button to cancel the operation and return to the playback menu.
OK
The copy-unsuccessful message will appear when one or all of the images could not be copied.
Check the memory card to see which files were copied and then repeat the procedure for the
uncopied images.
Camera Notes
E-mail Copy makes a standard 640 X 480 (VGA) or 160 X 120 (QVGA) JPEG copy of an
original still image so that it may be easily transmitted by e-mail. If an economy image is
selected for E-mail Copy, the image quality will not change. E-mail copies are saved to
the original card. The copy function is selected in the custom 2 section of the playback-
mode menu (p. 62).
When the copy function is used, a folder is created for the files (p. 90); copy folder name
ends in EM. Images with voice memos are copied with their audio files. Copies of locked
images are unlocked. DPOF information is not copied.
The amount of data can be converted into E-mail copies depends on the free space
remaining on the memory card and the image size of the copy. The E-mail copy function
has two menu options:
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal to make the connection using the supplied AV cable. The camera is compatible
with the NTSC and PAL standards. The video-output setting can be checked and set in
the custom 2 section of the setup menu (p. 74).
1.Turn off the television and the camera.
2.Slide the AV-out terminal / USB-port cover open. Insert
the small plug of the AV cable into the camera.
3.Plug the other end of the AV cable into the video and
audio input terminals on the television. The yellow plug
is for the video output. The white plug is for the monau-
ral audio output.
4.Turn the television on.
5.Change the television to the video channel.
6.Turn the camera’s mode dial to the playback position.
The camera’s monitors will not activate when the cam-
era is attached to a television. The playback-mode dis-
play will be visible on the television screen.
7.View images as described in the playback section.
2
3