Instruction manual

STANDARD SCAN UTILITY

EXAMPLE: SETTING OUTPUT BY PRINT SIZE AND OUTPUT

RESOLUTION

1 Select millimetres from the unit list box.

2 Enter the output resolution in the output-resolution list

box. In this example, enter 300.

• This example is based on a printer with a 300 dpi output.

3 Enter the output size: in this example, enter 148 for the

width and 100 for the height. Click on the output-size

lock button to fix the values.

4 Use the mouse to adjust the cropping frame over the

prescan image to define the final scanning area.

• Click on the frame of the cropping area to resize the box. The input res-

olution will adjust according to the cropping area. Click and drag the

centre of the area to move the frame.

• The scan setting is now complete.

• Once made, scan settings remain in effect until changed.