Instruction manual

12
INSTALLING DRIVER SOFTWARE – MACINTOSH
1 Turn on the computer to start the Mac OS.
2 Insert the DiMAGE Scan Elite II CD-ROM into the CD-ROM drive.
• Dimage Scan Elite2 CD-ROM icon will appear on the desktop.
3 Double-click on the DiMAGE Scan Elite 2 icon.
• The driver, manual, and acrobat reader folders will appear.
4 Double-click on the driver folder.
• The language folders will appear.
5 Open the English language folder,
then double click on the DS Elite 2
installer.
• The installer’s start-up screen will appear.
6 Click “Continue” on the installer
screen to begin the installation routine.
7 The end-user license agreement will appear.
If you accept the terms of the agreement,
click “Accept” to continue the installation
routine.
• If you do not agree to the conditions stated in the end-
user license agreement, click “Decline” and the software
will not be installed.
8 At the bottom left of the installer screen,
specify the location in which the software
will be installed. To change the designated
location, use the install-location menu; this
menu can be used to select an existing loca-
tion or create a new folder.
9 Select the installation method from the pop-
up menu at the top left of the installer
screen. Click on “Install” to begin installa-
tion.
• The easy-install option will install the required software. If
only specific programs need to be installed, select the
custom-install option; click the check box of the files to be
installed.