Hardware manual

LOADING THE FILM HOLDERS

Using the APS Adapter AD-10 (sold separately)

APS (Advanced Photo System) cassette film can be scanned using the APS Adapter AD-10. The

cassette must contain processed film; the square number 4 mark at the end of the cassette

should be highlighted in white. Do not load unprocessed film.

To load an APS cassette, slide the film-cham-

ber release (1) toward the top of the adapter

unit until the chamber door opens (2). The

film-chamber release will not return to its orig-

inal position until the door is closed.

Insert the cassette into the film chamber as

shown (3). Close the chamber door (4); the

film-chamber release will return to its original

position (5).

When the indicator lamp glows steadily, open

the front door until the top of the door is

aligned with the APS film-holder mark.

With the scanner contacts face up, insert the

adapter into the scanner until it stops. The

scanner detects the holder and automatically

loads the film. Do not remove the holder until

the film has been rewound, see page 13.

When using the APS adapter, if the scanner makes a strange sound or the film-advance warning

appears, eject the APS adapter immediately (p. 13) and do not reinsert it. Contact a Minolta serv-

ice facility.

Scanner contacts

(Keep clean)