Specifications

ManualsBrandsMinolta ManualsDigital CameraDIMAGE F300 - V2

EPSON PRODUCT SUPPORT BULLETIN

Date:

06/10/2009

Originator:

TIB #:

PSB.2009.06.002

Authorization:

Reference:

TI 09-08j Rev. A

Total Pages:

Product(s):

PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p

/ 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 /

826W

Subject:

Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to

v2.51

This bulletin was created to inform you of the release of the new version 2.51 of the

EMP NS Connection software.

Description of Change:

Improvements have been made to the EMP NS Connection utility.

Reason:

The improvements to NS Connection V2.51 are as follows

Improvements（V2.50 ( V2.51

Improvements  Addition of 10 new languages: Arabic, Ukrainian, Romanian,

Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese and Hebrew.

 Addition of troubleshooting function (Windows Only)

When pressing the troubleshooting button, the

corresponding troubleshooting and error number is displayed

in the error message window.

• When experiencing problems with NS Connect, please report to

Epson the error number along with the failure information.

Error number

Page 1 of 8

PSB.2009.06.002

Summary of content (71 pages)

PAGE 1
EPSON Date: TIB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 06/10/2009 Originator: DS PSB.2009.06.002 Authorization: TI 09-08j Rev. A Total Pages: 8 PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p / 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 / 826W Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to v2.51 This bulletin was created to inform you of the release of the new version 2.51 of the EMP NS Connection software.
PAGE 2
Also you can access troubleshooting by clicking Start Æ All programs Æ EPSON ProjectorÆEMP NS ConnectionÆEMP NS Connection V2.51 Troubleshooting. Page 2 of 8 PSB.2009.06.
PAGE 3
Fixed error message displayed by the NVIDIA utility Failure Symptom When starting Quick Wireless/USB Display/NS Connection on a PC with the built-in NVIDIA graphics chip (ex.ThinkPadT61 NVIDIA Quadro NVS 140M/NVIDIA Quadro FX 570M Display Driver), the NVIDIA utility displays consecutive error messages. As a result, some PCs will experience a lock-up. Countermeasure Hardware acceleration level is set to 3 when Quick Wireless/USB Display/NS Connection are being used.
PAGE 4
Limitation All Operating Systems • When using EAP type of security that consumes a lot of CPU resources, projectors may disconnect from NS connection. The solution is to click Set Options of NS Connection and set Adjust Performance to Fast. • It takes more time for the PowerLite 1725 / 1735W / 1825 / Pro G5150 / Pro G5350 projectors to disconnect from NS connection as compared to the PowerLite 1705 / 1715 / 1815 projectors, due to the limitation of the new OS (WindowsCE) on IM-X4 projectors.
PAGE 5
Macintosh OS In case of uninstalling NSC V2.20 or later version, it is possible to uninstall by following 2 methods. - Delete by installer exclusively for NSC version which you want to uninstall. For example, when you want to uninstall NSC V2.40, you need to use installer for NSC V2.40. NSC V2.20 and later version can not be uninstalled automatically by different version installer. - Delete manually.
PAGE 6
1.30 1.31 1.32 1.40 2003 May 31, 2004 June 18, 2004 January 18, 2004 April 1, 2005 2.00 2006/06/20 2.10 2006/12/08 2.20 2006/05/29 2.30 Nov. 27, 2007 2.40 Mar. 24, 2008 2.50 Jun.2,2008 2.51 Feb.
PAGE 7
Supported by V2.30 Manufacturer Adapter Name Name D-Link Air Plus XTREMEG DWL-G650 NETGEAR WN511T BUFFALO Buffalo all products IBM ThinkPad products IBM ThinkPad products Logitec NETGEAR Logitec LAN-WAG/U2 Wireless LAN Adapter Wireless-G Notebook Adapter v.5.0 WG511AJP NETGEAR WGM511 NETGEAR WPNT511 Linksys WPC300N Linksys WPC54G Linksys WPC54GX4 Linksys WUSB54GP Linksys WUSBF54G NETGEAR WG511 v2 Linksys Page 7 of 8 PSB.2009.06.
PAGE 8
Linksys WPC54GX Supported by V2.40 Linksys WUSB54GSC Supported by Quick Wireless Connection V.1.00 / NSC V2.50 Supported by Quick Wireless Connection v1.02 / NSCv2.51 Atheros Wireless-G Notebook Adapter With SRX Wireless Network Monitor v. 1.2 Compact Wireless-G USB Adapter Wireless Network Monitor v1.
PAGE 9
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 04/20/2009 Originator: JAM PSB.2009.06.001 Authorization: TI 09-05e Rev. A/B Total Pages: 5 PowerLite 735c / Cinema 500 / 737c / 745c / 755c / 765c / 830p / 835p / 1705c / 1715c / 6100i / 6110i / 7800p / 7850p / 7900NL / 8300i / 8300i with EasyMP.
PAGE 10
(2) Addition of Input Source (Only PowerLite 84 / 85 / 825 / 826W) Previous version of EMP Monitor included USB Display, USB and LAN as one source: EasyMP. The input source buttons for USB display, USB, and LAN are available as separate input sources as shown below: - Old version - EMP Monitor V4.22 EMP Monitor V4.22 - New version - EMP Monitor V4.30 EMP Monitor V4.30 . (3) New feature for the PowerLite 84 / 85 / 825 / 826W.
PAGE 11
Limitations When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state, EMP Monitor cannot detect the error. The reason is that when the lamp cover is opened, the primary power source that reports the error state to EMP Monitor is turned off immediately. This is different from other models which make the secondary power source turn off under the same condition. Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier versions. EMP Monitor Ver. 4.
PAGE 12
Software Upgrade History: Version Release date 3.00 December 25,2002 3.01 February 26,2003 3.02 April 18,2003 3.03 November 21,2003 3.04 April 1, 2004 4.01 October 18, 2004 4.02 August 29, 2005 4.10 4.22 May 8, 2006 May 15, 2007 September 26, 2007 March 31, 2008 4.30 April 3, 2009 4.20 4.21 Remarks Supported PowerLite 735c Supported PowerLite 7800p / 8300i Supported PowerLite 7850p / 8300i with EasyMP.
PAGE 13
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 12/18/2008 Originator: DS PSB.2009.01.006 Authorization: TI 08-22e Rev. A/B Total Pages: 7 PowerLite 735c / 737c / 745c / 755c / 765c / 835p 1705c / 1715c / 1815p / 1825p / 7850p / 8300i with EasyMP.net option Pro G5150 / Pro G5350 / 1725 / 1735W Release of Check Tool for Network Projectors V1.00 (for Windows) This bulletin was created to inform you about the release of Epson Check Tool software for Network Projectors version 1.
PAGE 14
Notes 4. Checks wireless LAN switching • Checks whether wireless LAN adapter is turned ON. • Checks whether EMP Quick Wireless Connection and EMP NS Connection’s Quick Connection mode can set the SSID on the user’s PC when trying to connect to a projector using EMP Quick Wireless Connection and EMP NS Connection’s Quick Connection Mode. The Check Tool checks for communication conflict and whether it can actually stop the utilities when both utilities--EMP Quick Wireless Connection V1.
PAGE 15
Notes Output of the log file: • The Check Tool records the result in a text file (log file). Usually, the log file is saved under the name of CheckInfoDATE.log in the directory where “EB_CHT.exe” is stored Limitations • When the Check Tool is checking the user’s PC, the user’s PC drops off network. • The Check Tool does not check whether the firewall of manufacturers of security software other than Windows may be blocking EPSON Quick Wireless Connection/EMP NS Connection.
PAGE 16
3) Location of download file: Check Tool for Network Projector V1.00 Download epson12794.exe from the Epson website (www.epson.com). This is a self-extracting file; please follow the screen prompts to install the Check Tool software. 4) Double-click the [EB_CHT.exe] icon 5) Read the contents of the [SOFTWARE LICENSE AGREEMENT], and click the [Agree] button. 6) A dialog indicating the program is starting opens with the following message: This tool cuts off the network connection temporarily.
PAGE 17
7) The Check tool dialog is displayed. It takes a few minutes for the results of the verification are displayed 8) When two or more wireless LAN adapters are available on your computer, the adapter selection dialog opens. Select the wireless LAN adapter and press the OK button to continue. Page 5 of 7 PSB.2009.01.
PAGE 18
9) When the verification is complete, the result is displayed on the bottom of the dialog. The result is stored in the same folder as the check tool. File Name: CheckInfo<****>.log **** indicates the created date and time. [Exhibit 1] Wireless LAN client list that NSC and Quick Wireless Connection stop their service process Manufacturer Name D-Link Supported by NSC V2.
PAGE 19
Linksys WPC300N Linksys WPC54G Manufacturer Name Linksys Adapter Name Linksys WUSB54GP Linksys WUSBF54G NETGEAR WG511 v2 Linksys WPC54GX Supported by Linksys NSC V2.40 Supported by Atheros NSC V2.50 & Quick Wireless Connection V1.00 WPC54GX4 WUSB54GSC Wireless-N Notebook Adapter Wireless Network Monitor v1.05 Wireless-G Notebook Adapter Wireless Network Monitor Ver 3.1 Wireless LAN Utility Name Wireless-G Notebook Adapter with SRX400 Setup Wizard V1.
PAGE 20
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 09/17/2008 Originator: VS PSB.2009.01.003 Authorization: TI 08-29e Rev. A Total Pages: 8 PowerLite 1735W, 735c, 737c, 745c, 755c, 765c, 835p, 1705c, 1715c, 1725, 1815c, 1825, 7850p, 7950p, 8300i with EasyMP.Net optional module, Pro G5150 and Pro G5350 projectors EMP SlideMaker2 updated Version 1.
PAGE 21
1) Selecting Aspect Ratio for the Projector being used: a) Properties Window b) Drag and Drop Window 2 of 8 PSB.2009.01.
PAGE 22
2) How to Verify the Aspect Ratio of the Scenario: The resolution of the scenario is displayed in the window title of the Scenario Window and Scenario Preview as shown below: a) Scenario Window b) Scenario Preview 3 of 8 PSB.2009.01.
PAGE 23
3) Location of download file: EMP SlideMaker2 updated Version 1.30 Download epson12812.exe from the Epson website (www.epson.com) This is a self extracting file, please follow screen prompts. After “Clicking” on the “Setup.exe” file, your will be prompted to: 4 of 8 PSB.2009.01.
PAGE 24
Select you language. 5 of 8 PSB.2009.01.
PAGE 25
Click “Next” at this screen. 6 of 8 PSB.2009.01.
PAGE 26
Click “Finish” to complete the installation. 7 of 8 PSB.2009.01.
PAGE 27
4) How to User the software: Please refer to the original documentation that came with your Projector.
PAGE 28
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 11/13/2007 PSB.2007.11.005A TI 07-63e, Rev. A Epson EMP Monitor EMP Monitor Version 4.21 Release Originator: AP Authorization: Total Pages: 3 This bulletin was created to inform you of the release of Epson EMP Monitor version 4.21 utility.
PAGE 29
PowerLite 735c PowerLite 737c PowerLite 745c PowerLite 755c PowerLite 765c PowerLite 830p PowerLite 835p PowerLite 1705c PowerLite 1715c PowerLite 6100i PowerLite 7800p PowerLite 7850p PowerLite 7900NL PowerLite 8300i / 8300NL PowerLite 8300i with the EasyMP.
PAGE 30
Software History: Version 3.00 3.01 3.02 Release Date December 25, 2002 February 26, 2003 April 18, 2003 3.03 3.04 November 21, 2003 April 1, 2004 4.01 October 18, 2004 4.02 August 29, 2005 4.10 May 8, 2006 4.20 4.21 May 29, 2007 September 26, 2007 Notes Added support for the PowerLite 735c Added support for the PowerLite 7800p / 8300i Added support for the PowerLite 7850p / PowerLite 8300i with the EasyMP.
PAGE 31
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 8/30/2007 Originator: DS PSB.2007.08.001 Authorization: N/A Total Pages: 1 Epson Projectors with an HD-15 VGA Analog/Component Input Elmo HV-110XG Document Camera and Projector Compatibility This bulletin was created to inform you of an operational issue with the Elmo HV-110XG Document Camera when initially connected to an Epson projector.
PAGE 32
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 04/20/2006 Originator: AP PSB.2006.04.002 Authorization: TI 05-95e Rev. A Total Pages: 1 PowerLite 735c / 737c / 745c / 755c / 765c / 835p / 7850p Animation converter issue found with EMP SlideMaker2 version 1.12 This bulletin was created to inform users of the EMP SlideMaker2 version 1.12 software of a problem converting certain animations from Microsoft PowerPoint into a Scenario file.
PAGE 33
EPSON Date: PSB #: Reference: Product(s): Subject: Product Support Bulletin 05/11/2005 PSB.2005.05.007 N/A Epson NS Connect Version 1.40 1400 x 1050 DVI Compatibility Support Originator: Authorization: Total Pages: JAM 16 Reason: This bulletin is to inform you of the testing results Epson NS Connect (version 1.40) and the Dell Latitude D600 Laptop. Question: Has Epson NS Connect been tested for compatibility with the Dell Latitude D600 Laptop? Answer: Yes, Epson NS Connect (Version 1.31 and 1.
PAGE 34
Very Important Items To Check: 1. Check the Wireless channel and B/G Mode settings. 2. Wireless control – Configure the wireless settings with Windows and not with a wireless software utility. (Usually active on the lower right taskbar) 3. Verify connection mode AdHoc or Infrastructure 4. Search and connect to the target wireless device / verify Open/Shared and WEP settings 5. Verify communication reception... packets received/sent. 6.
PAGE 35
Highlight "Wireless Network Connection" - Right-click Page 3 of 16 PSB.2005.05.
PAGE 36
Click the "General" tab Click the Wireless Network Connection Properties Screen Connect using "Intel(R) Wireless 2200BG Network Connection – Click the “Configure” button.* *Click the “Configure” button for the wireless adapter installed in the computer on which the wireless settings are being configured. Page 4 of 16 PSB.2005.05.
PAGE 37
On the next GUI screen - Click the "Advanced" tab - In the "Property" Pull-Down Highlight/Pick "AdHoc Channel" and for "Value" on the Pull-Down pick channel "5" Page 5 of 16 PSB.2005.05.
PAGE 38
In the "Property" pull-down menu: Highlight/Pick "Wireless Mode" and for "Value" remove the check for "Use default value" and on the pull-down pick "802.11b only". Then click the “OK” button to close. Page 6 of 16 PSB.2005.05.
PAGE 39
2. Right-click "My Network Places" and choose Properties Highlight "Wireless Network Connection" - Right-click Click on the "Wireless Networks" tab Verify or check the [X] "Use Windows to configure my wireless network settings" Page 7 of 16 PSB.2005.05.
PAGE 40
If un-checked, check and click on [OK] button on the bottom of the GUI Double-check that the setting took effect by going through item 2 again. Page 8 of 16 PSB.2005.05.
PAGE 41
3. Right-click "My Network Places" Properties Highlight "Wireless Network Connection" - Right-click Click on the "Wireless Networks" tab On the bottom lower right of the GUI, click on the [Advanced] button In the "Advanced" screen select the mode of operation Click "Access Point" and click the "Close" button Page 9 of 16 PSB.2005.05.
PAGE 42
4. "Wireless Networks" tab still visible On the "Available networks" box... you should see the wireless devices in the pull-down screen. To the right of that section there are 2 boxes [Configure] or [Refresh] If your wireless device is not seen, click "Refresh"...the device should appear in 1-2 minutes. Page 10 of 16 PSB.2005.05.
PAGE 43
Highlight the access point (proxim1 in this example) and click configure. Example verify SSID name (proxim1 in this example), "Network Authentication" Open/Shared (Open preferred),"Data encryption" (WEP settings) Disabled/WEP (Disabled preferred) Change as necessary and click the [OK] button. "Wireless Networks" tab still visible Click the [OK] button... the system should connect in 1-2 minutes. Page 11 of 16 PSB.2005.05.
PAGE 44
5. On the taskbar. move the mouse cursor over the wireless network icon (2 monitor screens overlapping). The following information should appear: Wireless Connection Network (proxim1 in this example) Speed: 11.0 Mbpd Signal Strength: Excellent Right-click to open the wireless properties and verify good transmission and reception of wireless packets. Page 12 of 16 PSB.2005.05.
PAGE 45
6. Start NS connect From the pull-down Menu, select the “wireless” adapter card or wireless port. Click OK Page 13 of 16 PSB.2005.05.
PAGE 46
The projector should appear on the list in 1-2 minutes. Highlight the projector, check [X] the projector name box. Page 14 of 16 PSB.2005.05.
PAGE 47
Click on the ‘Lock’ and “Presentation mode” icons to enable them. Page 15 of 16 PSB.2005.05.
PAGE 48
Click on the Connect button and the following shows the session in use and active. Follow the NS Connect instructions on how to control the projector and change the projector settings. Page 16 of 16 PSB.2005.05.
PAGE 49
EPSON Date: PSB #: Reference: Product(s): Subject: Product Support Bulletin May 11, 2005 VS Originator: PSB.2005.05.002 Authorization: TI 04-45e Rev. D 6 Total Pages: PowerLite 737c / 745c / 835p Supported USB devices, memory cards, and LAN (wired and wireless) cards Reason: This bulletin is to inform you of the testing results for USB devices, memory cards for operation and functionality and supported wired and wireless LAN cards.
PAGE 50
BUFFALO HD-P40U2/UC BUFFALO HD-P60U2/UC I.O DATA HDPX-U40 I.O DATA HDMX-U40 Logitech LHD-PBB80U2 NOVAC NVHD260U Alpha data AD-USB225HD CENTURY CSZ25U2 Bus Link DL-60-U2 Apple iPod（Third Generation）15GB Apple iPod（Fourth Generation）40GB Apple iPodmini 4GB Apple iPodPhoto 40GB FREECOM FXD-XS Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Pass Pass Pass Pass USB MEMORY I.O DATA EDP-512M I.O DATA EasydiskLight I.O DATA EDP2-256M I.
PAGE 51
Transcend JetFlash2A 512MB Pen Driver (mini) USB2.
PAGE 52
Wireless LAN cards configuration: The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection (Ad hoc mode) is made to the projector. The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection is made to the projector using an access point (Infrastructure mode). Items evaluated: The following items were tested and confirmed to work in both Ad hoc and infrastructure modes. (WEP is only supported in the infrastructure mode.) All functions of EMP Monitor.
PAGE 53
Evaluation results for the Wireless LAN cards: Wireless LAN card 3Com 3CRPAG175 3Com 3CRWE154A72 Buffalo WLI-CB-G54 Buffalo WLI-CB-AG54 Corega PCCL-11 Corega WLCB-11 V2 Corega WLCB-54GT Corega WLCF11 D-Link DWL-G630 D-Link DWL-AG660 Hawking WE120P Linksys WPC54G Netgear MA401 Netgear MA521 Planex GW-NS11X Planex GW-NS54G SMC SMC2435W SMC SMC2835W ZyXel ZyAIR B101 Proxim 8480-WD HAWKING WE110P+ VER10 NETGEAR WG511FS D-Link DWL-G650 OLITEC CW-100G PowerLite 835p Pass Pass Pass Pass Pass Pass Pass Pass Pass P
PAGE 54
Evaluation results for the Wired LAN cards: Wired Card name 3Com 3CFXFE575CT-JP 3Com 3CCFE574BT 3Com 3CXSH572BT 3Com 3CXFEM656C Allied Telesyn AT-2800TX Belkin F5D5020f Corega FEther PCC-TXM Corega FEther II CB-TXD Corega FEther II PCC-TD Come Once (Taiwan Card) D-Link DFE-670TXD D-Link DFE-690TXD Hawking PN652TX Hawking PN672TX Intel PRO/100S Linksys PCM100 ver. 2 Linksys PCMPC100 ver. 3 Planex FNW-3800-TX SMC SMC8041TX SMC SMC8041TX V.
PAGE 55
EPSON Date: PSB #: Reference: Product(s): Subject: Product Support Bulletin March 8, 2005 PSB.2005.01.004A TI 04-45e Rev. C PowerLite 835p and PowerLite 745c Supported USB devices and memory cards Originator: Authorization: Total Pages: VS 3 Reason: This bulletin is to inform you of the testing results for USB devices and memory cards for operation and functionality. Models and firmware versions used in the evaluation: Model PowerLite 835p PowerLite 745c PW Firmware Version V1.03 V1.
PAGE 56
CENTURY CSZ25U2 Bus Link DL-60-U2 Apple iPod Third Generation 15GB Apple iPod Fourth Generation 40GB Apple iPodmini 4GB Apple iPodPhoto 40GB Pass Pass Fail Pass Pass Pass Pass Pass Fail Pass Pass Pass I.O DATA EDP-512M I.
PAGE 57
OLYMPUS CAMEDIAX-2 OLYMPUS CAMEDIA C-730UZ OLYMPUS CAMEDIA C-5060 Wide Zoom Panasonic DMC-FZ1 Panasonic LUMIX DMC-LC5 Panasonic LUMIX DMC-FX5 Pentax Optio330GS SANYO XactiJ2 SHARP ViewcamZ VL-Z7 SONY DSC-P72 SONY DSC-T1 Kodak DX 3500 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Pass Pass Pass Pass Pass Pass Pass Fail Fail Remarks: *1. Depends on the memory size. a) 256MB product failed the test. b) 64MB product passed the test. *2.
PAGE 58
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 10/08/2004 Originator: DS PSB.2004.10.002 Authorization: TI 04-46e Rev. A Total Pages: 14 EMP NS Connection, EMP Network Manager, EMP Monitor, EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver Evaluation results of Epson Projector PC applications tested in Windows XP with SP2.
PAGE 59
Executing the Software: When executing the software noted below for the first time after SP2 installation completes, the following security alert messages are displayed: [EMP NS Connection] Security alert screen (EMP NS Connection) [EMP Network Manager] Security alert screen (EMP Network Manager) Page 2 of 14 PSB.2004.10.
PAGE 60
[EMP Monitor] Security alert screen (EMP Monitor) [EMP Multi Screen Adjustment] Security alert screen (EMP Multi Screen Adjustment) The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the Auto button of Network or clicking the Add button after entering an IP address in the IP Address box. Page 3 of 14 PSB.2004.10.
PAGE 61
[Cinema Color Editor] Security alert screen (Cinema Color Editor) The functions of the three buttons displayed in the security alert screen are explained below. [Keep Blocking] --- Enables you to register a started application in the “Exceptions” program of the Windows Firewall. The network port that the application uses is blocked. By selecting this button once, this security alert message will not be shown when starting the application next time.
PAGE 62
Operating Status Report When selecting the Keep Blocking button, the security alert message is closed and the main screen of each application is displayed. [EMP NS Connection Application] Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not detected. The other applications operate normally. However, there is a case that execution of automatic search disables automatic detection.
PAGE 63
[Caution] In case the check box for Don’t allow exceptions is checked (this box is not checked at the initial setting), a network port for software is not unblocked even though the software is checked on Exceptions. Make sure this option is not selected. Windows Firewall screen Page 6 of 14 PSB.2004.10.
PAGE 64
c.) Select the Exceptions tab and display exceptions program. [Caution] If this check box is not checked, the security alert screen is not displayed when starting software. •Exceptions screen d.) Check the check boxes for the software you don’t want to block. Page 7 of 14 PSB.2004.10.
PAGE 65
[EMP NS Connection] • Check EasyMP Software box Unblock screen (EMP NS Connection) Page 8 of 14 PSB.2004.10.
PAGE 66
[EMP Network Manager Application]• Check EPSON Projector box Unblock screen (EMP Network Manager) Page 9 of 14 PSB.2004.10.
PAGE 67
[EMP Monitor Application]→ Check EasyMP.net Software box Unblock screen (EMP Monitor) Page 10 of 14 PSB.2004.10.
PAGE 68
[EMP Multi Screen Adjustment Application]→ Check EPSON Projector Software for Multi Screen box Unblock screen (EMP Multi Screen Adjustment) Page 11 of 14 PSB.2004.10.
PAGE 69
[Cinema Color Editor Application] ---> Check Cinema Color Editor. Unblock screen (Cinema Color Editor) By following the above procedure, the network port that each application uses is unblocked and they can operate normally. Page 12 of 14 PSB.2004.10.
PAGE 70
Corresponding program name to PC applications PC Application Program name EMP NS Connection EasyMP Software EMP Network Manager EPSON Projector EMP Monitor EasyMP.net Software EMP Multi Screen Adjustment EPSON Projector Software for Multi Screen Cinema Color Editor Cinema Color Editor When selecting the Unblock button: The Security Alert screen is closed and the main screen is displayed. Then the search result is displayed.
PAGE 71
VCOM Driver The following message is shown after the VCOM driver is installed on your PC. Select “No, not this time” item and continue the Plug&Play of the device. 8.) Notes: When you add the program to Exceptions list, the program can receive network communication from outside. This may cause a security risk such as exposure to a virus attack. Page 14 of 14 PSB.2004.10.