Instruction manual

Flash lamp (orange)
Steady: flash charged and ready to fire.
Blinking: flash is charging and the shutter is locked.
- 13 -- 12 -
DATA PANEL
VIEWFINDER
The following diagram displays all icons on the panel to aid explanation.
* The frame counter will indicate the approximate number of images that can be be
stored on the CompactFlash card in the selected image quality or size modes; if a
mode is changed, the frame counter will adjust accordingly on the data panel.
When in the movie-recording mode, the data panel will indicate the number of one-
minute movie clips that can be recorded on the CompactFlash card; “C” is used as
the abbreviation for clip. When less than one 60-second clip can be stored, the
counter will indicate the number of remaining seconds. When recording, the data
panel counter will countdown from 60 seconds or from the remaining time when less
than one clip can be recorded.
FUNCTION DIAL
PC mode (p. 76)
Self-timer/Remote control (p. 41)/
Slide show (p. 56)
Single-frame advance (p. 27)/
Single-frame playback (p. 52)
Continuous advance (p. 40)/
Index playback (p. 53)
Setup mode (p. 71)
Movie recording (p. 38)/
Movie playback (p. 58)
• The dial is used for quick and simple
access to the camera’s major functions.
NAMES OF PARTS
Flash-mode indicators p. 30
Self-timer/Remote control indicator p. 41
Manual white-balance indicator p. 48
Exposure-compensation indicator p. 34
Battery-condition indicator p. 21
Sharpness indicator p. 49
Image-quality indicators p. 46
This area of the panel is used for the following:
• Frame counter* p. 50
• Exposure-compensation display p. 34
• No CompactFlash card indicator p. 23
Image frame
Focus frame
Focus lamp (green)
focus confirmed and locked.
cannot focus (p. 28).
an image is being trans-
ferred between the camera
and CompactFlash card or a
movie clip is being recorded.
Steady:
Blinking quickly:
Blinking slowly:
Downloaded From camera-usermanual.com