Instruction manual

- 89 -- 88 -
TROUBLESHOOTING - Recording Mode
To record images, the camera must be on. Use the lens cover slide to open the lens
cover and turn on the camera. The LCD monitor automatically activates; it can be
turned off by pressing the display/enter button.
Problem Symptom Cause Solution
The camera
will not work.
Nothing dis-
played on the
data panel or
the LCD moni-
tor.
The camera is off.
Auto-power-off function
has shut off the cam-
era
The batteries are
dead.
The batteries are
inserted incorrectly.
The AC adapter is not
connected properly.
Turn on the camera by
moving the lens-cover
slide so that the lens is
visible (p. 15).
Turn the camera off
and then on using the
lens-cover slide near
the lens (p. 21).
Replace batteries
(p. 20).
Reinsert the batteries
taking care that the
negative and positive
terminals are orientat-
ed as indicated on the
inside of the battery
chamber door (p. 20).
Check that the adapter
is connected to the
camera and a live elec-
trical outlet (p. 22).
Shutter will not
release.
Zero displayed
on the frame
counter of the
data panel.
“Card full”
appears on
the LCD moni-
tor.
CompactFlash card is
full and unable to store
an image at the image-
quality or image-size
setting on the camera.
Insert a new
CompactFlash card
(p. 23, 24).
Delete some images
from the CompactFlash
card (p. 62).
Change the camera’s
image-quality or image-
size setting (p.44 - 47).
“CF” displayed
on the data
panel. “No
card” appears
on the LCD
monitor.
No CompactFlash card
in the camera.
Insert a CompactFlash
card (p. 23).
Appendix
• Troubleshooting
• Care and Storage
• Technical Specifications
Downloaded From camera-usermanual.com