Instruction manual

- 87 -- 86 -
For Macintosh
1 Confirm that the green focus lamp is not lit or blinking and then drag the
mass-storage-device icon and drop it into the trash.
• The icon will reappear on the desktop.
2 Disconnect the USB cable.
• If the USB cable is disconnected before performing step 1, an alert mes-
sage will appear. Always complete the first step 1 before disconnecting
the USB cable.
For Windows 2000 ProfessionalDISCONNECTING THE CAMERA FROM THE COMPUTER
For Windows ME
For Windows 98
Confirm that the green focus lamp is not lit or blinking and then disconnect the
USB cable.
Never disconnect the camera when the green focus lamp is lit or blinking
- the data or CompactFlash card may be permanently damaged.
CONNECTING TO A COMPUTER
To disconnect the camera, double click on the unplug-or-eject-hardware
icon located on the task bar. The unplug-or-eject-hardware window will
open.
The hardware devices to be stopped
will be displayed. Click “Stop.”
A confirmation screen will
appear. Clicking “OK” will stop
the device.
Click “OK.” The camera
can now be safely dis-
connected from the
computer.
To disconnect the camera, double click on the unplug-or-eject-hardware
icon located on the task bar. The unplug-or-eject-hardware window will
open.
The hardware devices to be stopped
will be displayed. Click “Stop.”
A confirmation screen will
appear. Clicking “OK” will stop
the device.
Click “OK.” The camera can
now be safely disconnected
from the computer.
Downloaded From camera-usermanual.com