Instruction manual

- 83 -- 82 -
CONNECTING TO A COMPUTER
CONNECTING TO WINDOWS 98
When the camera is plugged into
the computer, the operating system
will detect the new device and the
add-new-hardware-wizard window
will open. Place the DiMAGE E201
CD-ROM in the CD-ROM drive.
Click “Next.”
Choose the recommended search
for a suitable driver. Click “Next.”
On the next screen, choose to specify
the location of the driver. The driver on
the CD-ROM should be displayed; the
browse window can be used to find the
driver. When the driver location is
shown in the window, click “Next.”
The add new hardware wizard
will confirm the location of the dri-
ver. Click “Next” to install the dri-
ver in the system.
• One of two drivers may be located:
Coachmsd.inf or Chiomsd.inf.
The last window will confirm the
driver has been installed. Click
“Finish” to close the add new
hardware wizard.
When the my-computer window is opened, a
new removable-disk icon will be displayed.
Double click on the icon to access the cam-
era’s CompactFlash card, see page 84.
CONNECTING TO A MACINTOSH
This camera can be used as a mass-storage device with Mac OS 9.0 and 9.1. When
the camera is connected to the USB port, an untitled drive icon will automatically
appear on the desktop. Double click on the icon to access the camera’s
CompactFlash card, see page 84
The driver needs only to be installed once. The computer will automatically recognize
the camera and display the removable-disk icon the next time they are connected.
Downloaded From camera-usermanual.com