Instruction manual

- 73 -- 72 -
SETUP MODE
The setup menu allows changes to the camera’s default settings to alter monitor
brightness, the auto-power-off period, the date and time, and the video-out signal.
The setup menu can be used to format a CompactFlash card and reset the camera
to its default settings. Any setting made on the setup menu will not be reset when
the camera is turned off.
Navigating the setup menu is quick and simple. In the recording or playback mode,
set the function dial to the setup position; in the recording mode, the LCD monitor
will automatically activate; in the playback mode, the monitor must be activated
using the display/enter button. Simply highlight the item you want to change and
enter it. The desired setting is then highlighted and entered.
Use the scroll buttons to highlight the function to be changed.
To select the highlighted function, press the display/enter button.
Highlight the desired setting using the scroll buttons.
1
2
3
4
2
1
4
3
Select the desired setting by pressing the display/enter button.
NAVIGATING THE SETUP MENU
Setup Menu
LCD BRIGHT
BRIGHT
NORMAL
DARK
FORMAT
POWER OFF
DATE
TIME
NEXT
BACK
BEEP
VIDEO OUT
DEFAULT
30 MIN
10 MIN
5 MIN
3 MIN
ON
OFF
NTSC
PAL
NO
YES
NO
YES
Confirmation
screen
Confirmation
screen
Style
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
Year
Month Day
Hour
Minute
Confirmation screens - selecting “NO” will cancel the operation, selecting “YES” will
execute the operation.
Scrolling to the bottom of the first screen or the top of the second will automatically
change to the next screen.
Downloaded From camera-usermanual.com